TBS Tango 2 PRO 915MHz/868MHz Full Size Hall Sensor Gimbal FreedomTX System FPV RC Radio Controller New Version With Built-in TBS Crossfire for FPV Racer Drone
Redefining The Remote Control
TBS has been at the forefront of perfecting the interface between drone and mind. The TBS Tango 2 changes how remote controls will be from here on out! Despite being the smallest remote control available, it comes with full-size folding HAL sensor gimbals, full-featured FreedomTX (temporary OpenTX fork), the lowest end-to-end latency of any remote and transmission system, unbreakable 3 & 2-position switches, open-source operating system, built-in battery, USB-C charging, and so much more! It's not just a retouched game controller, it was designed from the ground up for R/C! The form factor and features make it the ideal take-anywhere, fly-anytime remote control.
Crossfire Inside
The first radio with TBS Crossfire built-in. This significantly lowers your cost, increases reliability and minimizes set up time. And the cherry on top are the LUA scripts being part of the familiar user interface. The antenna swivels out of the way or doubles as a kickstand when resting. TBS Cloud ready to go from the start. It all just makes sense.
Specifications:
Type: All-in-one (AIO) integrated radio
RC system: Built-in TBS CROSSFIRE Micro TX
Output power: 25mW to 1W
Frequency Bands: 868MHz (EU, Russia), 915MHz (USA, Asia, Australia)
Antenna: Standard full-size TX antenna
Switchable antenna polarization - horizontal / vertical
Optional external SMA port
Holding style: Pinch, thumb, and hybrid friendly
Default stick mode: Mode 2, throttle and yaw left (user-changeable)
Display: High-resolution 1.2” OLED-panel, 128 x 96 pixels
Models: Standard and Pro model. PRO model has folding gimbals
Battery: Lithium-polymer 3.7V 5000mAh internal battery pack, USB-C charging
Runtime: Approx. 8 hours
Channels: 8- or 12-channels (CROSSFIRE, selectable in receiver menu)
Operating range: Variable depending on output power and radio environment
Gimbals Full-size hall sensor gimbals, Adjustable vertical range, Adjustable spring
tension, Foldable sticks (PRO version only), m3 threading
Controls: 2x Quad full-size hall gimbals
2x Two-position switches
2x Three-position switches
2x Lower-shoulder momentary buttons
3x Configuration buttons
1x Rocker switch
1x Power-on button
Ports: 3.5mm headphone audio-jack for OpenTX voice support
USB-C for software updates and charging
Neck-strap mounting: Screw on mount - sold separately
Speaker: 1W, for OpenTX voice support
Simulator compatibility: Yes, over USB-C
Working temperature: 0 - 40°C
Size: W 157 x L130 x H70 mm (H50 mm folded)
Weight: 345 grams
Package Size: 210 x 85 x 160 (mm)
Package Weight: 569g
Features
* Full-size HAL sensor gimbals
* Ball-bearing
- Configurable resistance and tension
- Adjustable throttle & pitch throw (+/- 10 degrees)
- Spare spring set included for lower tension
- Foldable gimbal sticks (Pro only)
* Ergonomic and compact design with comfy rubber grips
* Robust, streamlined switches
- 2x 2-position switches
- 2x 3-position switches
- 2x momentary buttons
* TBS Crossfire built-in
- CRSFShot for lowest latency and most direct response of any remote control available
- Range of up to 30km / 20mi from the palm of your hand
- Swivel-antenna that doubles as a kickstand
- Up to 12 channels supported
* Built-in 5000mAh 1S LiPo with USB-C 2A charging (2.5 hours for full charge)
* Speech audio output with audio jack & haptic vibration alert
* Open Source remote control operating system (FreedomTX, a temporary fork of OpenTX)
* Rocker dial and 3 button menu for super-simple navigation
* High resolution (128*96) black & white OLED screen w/ backlight
* Digital rocker dial trim
* 100+ model memory with included SD-card
* TBS Cloud compatible
Package Included:
1 x Tango 2 Pro
1 x Velvet Carry Bag with TBS Logo
1 x Springs Set ( Default and Lower Tension)
2 x Throttle limitation screws (with allen key)
1 x Sticker Sheet
1 x Tango 2 3D KeyChain (will only be included in the first run)
