Descriptions:
Compared to the previous F745 AIO, the F405 AIO offers enhanced performance with a continuous 40A current rating and a peak current of 45A (10s). It is compatible with 2-4" and ultra-lightweight 5" FPV builds and supports 1002-2104 brushless motors. Pre-flashed with Bluejay firmware, it supports bidirectional Dshot, includes dual CNC heat sinks, onboard TVS diodes, and is equipped with low-ESR high-frequency electrolytic capacitors.
Â
Features:
1. Wireless Tuning 2.0 Upgrade: Supports Meteor LED strip function, allowing for custom your own cool styles.
2. Wireless BOOT Button: With the APP’s DFU button, the flight controller can enter DFU mode without pressing a physical button, eliminating the hassle of disassembling when it cannot automatically boot.
3. Full Feature Tuning: Supports APP-based parameter tuning, firmware upgrades, and wireless motor direction adjustment.
4. Equipped with ICM-42688 Gyroscope: Features independent LDO power supply, a PSRR (Power Supply Rejection Ratio) of up to 100dB, and output ripple as low as 1.3mV! This greatly improves gyroscope measurement accuracy and enhances flight stability.
5. STM32F405 MCU: Offers better performance than the F411 and greater compatibility compared to the G4 series. Â (SpeedyBee F405 AIO supports both Betaflight and INAVFlight).A higher frequency means stronger performance, larger flash memory, and greater compatibility for program functionalities. Â
   - STM32F405: 168MHz Frequency, 1MB Flash Â
   - STM32F411: 100MHz Frequency, 512KB Flash Â
   - STM32G474: 170MHz Frequency, 512KB Flash
6. Equipped with the New SPA06-003 Barometer: Further improves accuracy, with barometric pressure measurement accuracy increased to 0.5%, and relative pressure accuracy improved to ±0.03hPa, equivalent to ±0.25m.
Â
FCÂ Specifications:
Product Name: | SpeedyBee F405 AIOÂ Flight Controller |
MCU: | STM32F405 |
Gyro: | ICM-42688P |
USB Port Type: | Type-C |
Barometer: | SPA06-003 |
OSD: | Supported |
Bluetooth BLE: | Supported, Bluetooth speed enhancement - 2.0 |
Wireless Flight Controller Firmware Update: | Supported (no need to press physical BOOT button) |
Wireless Download & Black Box Analysis: Not supported DJI Air Unit Connection Method: | Supports both 6-pin direct insertion and soldering |
6-pin DJI Sky Port Direct Insertion: | Supported, can directly connect to DJI O3/RunCam Link/Caddx Vista without changing wire order |
Flash (for BlackBox): | 8MB |
Betaflight CC Pads (Camera Parameter Adjustment): | Supported |
Input Voltage: | 3S-6S LiPo battery |
4V5 Output: | Two 4V5 outputs; total current 1A |
5V BEC Output: | Three 5V outputs; total current 2A; shared with 4V5 |
9V BEC Output: | None (comes with an external BEC module, can switch between 5V and 9V); total current output 2A |
MOTOR: | M1-M4 |
UART: | 4 full-function serial ports (UART3, UART4, UART5, UART6+SBUS[R2]) |
ESC Telemetry: | None |
I2C: | Supported |
LED Pads: | Supported, used to control WS2812 LED lights |
Buzzer Pads: | Supported, BZ+ and BZ- pads |
BOOT Button: | Supported, press and hold the BOOT button while powering on to enter DFU mode for firmware recovery |
RSSI Pads: | None |
SmartPort: | Not supported |
Supported Flight Controller Firmware: | BetaFlight(Default), INAV |
Firmware Target Name: | SPEEDYBEE F405Â AIO |
Mounting: | 25.5 x 25.5mm, 3mm hole diameter |
Dimensions: | 33.0mm (length) x 33.0mm (width) x 8mm (height) |
Weight: | 13.6g (including CNC) |
Â
 ESC Specifications:
Product Name: | SpeedyBee F405 AIOÂ ESC |
Input Voltage: | 3-6S LiPo battery |
Continuous Current: | 40A |
Burst Current: | 45A (10s) |
ESC Protocol: | Supports DSHOT600/300; other protocols may cause severe errors, please use with caution. |
Output Voltage: | VBAT battery voltage (used to power the flight controller) |
Current Sensor: | Supported (Scale = 254, Offse = 0) |
Firmware: | Blue-jay JH-40 48kHz |
Â
Â
Package included:
1x SpeedyBee F405 AIO
1x Soldering Practice Board
1x DJI Air Unit 6pin*80mm Connection Cable
1x 35V 470uF Electrolytic Capacitor
4x M2 * 6.6mm Silicone Dampening Sleeves
5x M2 Silicone Dampening Ring
5x M2 Nylon Hex Nut
1x XT30 Power Cable (Length: 7cm)
1x Type-C Extension Module
1x Power Expansion Board
1x BEC
1x Black Heat Shrink Tube for Type-C Extension Module
1x 4-pin * 80mm Cable for Type-C Extension Module
1x User Manual
4x M2*20mm Screws for F405 AIO & VTX Installation
4x M2*12mm Screws for F405 AIO Installation
1x Transparent Heat Shrink Tube for External BEC
1x 6-pin * 30mm Cable for External BEC
2x Capacitor Heat Shrink Tube
Â
